In-situ probes
STATIC—X IN SITU NMR PROBES
Single-channel static in situ/operando solid-state NMR probe
• Wide-bore or narrow/standard-bore
• Fields: 200 to 700 MHz
• X-range: 13C to 31P and 6Li
• Automatic tuning and matching
• Suitable for all NMR systems
Electrochemistry/battery options
• Three electrochemistry ports
• Suitable for various in situ NMR cells incl. plastic cell capsules and plastic bag cells
• Flow option, e.g. for redox flow cells
• Suitable for all electrochemical cyclers
STATIC H—X IN SITU NMR PROBES
Double-channel static in situ/operando solid-state NMR probe
• Wide-bore
• Narrow/standard bore options to be discussed
• Optimised for low 1H background
• Fields: 200 to 500 MHz
• X-range: 13C to 31P and 6Li
• H-range: 1H
• Automatic tuning and matching: possible via eATM robot
• Suitable for all NMR systems
Electrochemistry/battery options
• Three electrochemistry ports
• Suitable for various in situ NMR cells incl. plastic cell capsules and plastic bag cells
• Flow option, e.g. for redox flow cells
• Suitable for all electrochemical cyclers
STATIC F—X IN SITU NMR PROBES
Double-channel static in situ/operando solid-state NMR probe
• Wide-bore
• Narrow/standard bore options to be discussed
• Optimised for low 19F background
• Fields: 200 to 500 MHz
• X-range: 13C to 31P and 6Li
• F-range: 19F
• Automatic tuning and matching: possible via eATM robot
• Suitable for all NMR systems
Electrochemistry/battery options
• Three electrochemistry ports
• Suitable for various in situ NMR cells incl. plastic cell capsules and plastic bag cells
• Flow option, e.g. for redox flow cells
• Suitable for all electrochemical cyclers
In-situ setup for static NMR/MRI probes
Three-ports in situ setup for static NMR/MRI probes
• Magnet shielding plate for wide-bore magnet
• Three non-magnetic double-shielded cables with eyelet soldered to one side (connection to the in situ cell) and SMA adapter on the side that connects to the shielding plate. The SMA adapter has rotating end; i.e. the cable will not twist when attaching it to the SMA ports of the shielding plate.
• Note, cable length will be customised depending on the dimensions of the magnet/bore
• Three SLP-2.5+ filters
• Three SLP-5+ filters
Three-way in situ cell adapter
• In situ cell adapter to clip, solder, or through-hole connections of in situ cells (plastic cell capsule and other designs)
• Attached to three non-magnetic double-shielded cables with SMA adapters to the shielding plate
• Note, length will be customised depending on the dimensions of the magnet/bore
• Three RG316 in situ cables (5 m each) to connect the shielding plate to the electrochemical cycler/potentiostat (SMA socket / SMA plug)
• Three SMA—banana plug adapters suitable for Biologic SP-150e and similar devices
Accessories
In situ NMR cells
• Modular cylindrical plastic casing to assemble electrochemical cells
• Comprising three PEEK parts (top, bottom, and capsule)
• Encapsulated to hold cell parts in place and produce pressure
PCC-SHORT-OD8
• Plastic cell capsule short outer diameter 8 mm no flow-option
• L 26 mm, OD 8 mm, cavity 15×4 mm (depth 1 mm)
• Suited for solenoid coil ID 8 mm
PCC-SHORT-OD11
• Plastic cell capsule short outer diameter 11 mm no flow-option
• L 26 mm, OD 11 mm, cavity 15×6 mm (depth 1 mm)
• Suited for solenoid coil ID 11 mm
PCC-SHORT-OD11-WF
• Plastic cell capsule short outer diameter 11 mm with flow-option
• L 26 mm, OD 11 mm, cavity 15×6 mm (depth 1 mm)
• Suited for solenoid coil ID 11 mm
• Tubing in/outlet in bottom part
• Suited for tubing of OD 1.5 mm (e.g. ID 0.8)
PCC-LONG-OD11-WF
• Plastic cell capsule long outer diameter 11 mm with flow-option
• L 40 mm, OD 11 mm, cavity 27×6 mm (depth 1 mm)
• Suited for solenoid coil ID 11 mm
• Tubing in/outlet in bottom part
• Suited for tubing of OD 1.5 mm (e.g. ID 0.8)
PCC-SHORT-OD15
• Plastic cell capsule short outer diameter 15 mm
• L 26 mm, OD 15 mm, cavity 15×8 mm (depth 2 mm)
• Suited for solenoid coil ID 15 m
Solid state cells
Solid-state battery in situ NMR cells
• Modular cylindrical plastic casing to assemble solid-state batteries
• L 26 mm, OD 11 mm, materials space approx. 1 mm thickness
• Comprising three PEEK parts (capsule, two threads for electrodes)
• Current collector plates with attached wire and O-ring sealing
• Encapsulated to hold cell parts in place and produce pressure
• Suited for solenoid coil ID 11 mm
In situ NMR cell dis/assembly tools
Plastic cell capsule (dis)assembly tool OD8
• Suited for OD8 plastic cell capsules
• Quick and easy assembly of the plastic cell capsule in three steps
• Prevents misalignment and ripped-off current collectors
• Suited for the glovebox
Plastic cell capsule (dis)assembly tool OD11
• Suited for OD11 plastic cell capsules (short and long)
• Quick and easy assembly of the plastic cell capsule in three steps
• Prevents misalignment and ripped-off current collectors
• Suited for the glovebox
Plastic cell capsule (dis)assembly tool OD15
• Suited for OD15 plastic cell capsules
• Quick and easy assembly of the plastic cell capsule in three steps
• Prevents misalignment and ripped-off current collectors
• Suited for the glovebox
In situ NMR cell assembly kit
• Accessories kit comprising 30+ parts for the assembly of plastic cell capsules and other in situ cells, e.g. plastic bag cells
• Current collector wire and mesh (Al and Cu)
• Spacer materials (Teflon and Viton)
• Sealing materials: reusable O-rings and two-component glue
• Sealing materials: reusable putty-like pressure-sensitive adhesive
• Teflon tubing
Software
eCAT - in situ NMR/e-chem data analysis tool
Our tool "eCAT" allows automatic e-chem/NMR (raw) data processing and visualisation. The raw data input, e.g. Bruker Topspin NMR and BioLogic EC-Lab data is combined in one plot with individual NMR raw data handling such as baseline and phase correction for each spectrum. Postprocessing of the data including the peak fitting and the creation of videos is optional.