中文
- 中文
- English
干式3-10K制冷机
干式3-10K制冷机
TheDry ICE 3Kcryostat is ideal for a wide range of applications. Using simple and well proven technology ICEoxford is able to offer a highly adaptable cost effect cryostat that still retains high quality and performance levels.
Features:
3K, 8K and 10K options available
Range of cooling powers to suit your applications (Optical and transport measurement, Mossbauer experiments, cold trap etc.)
Vast choice of optical and non-optical tail sets, customised on request
Cost effective solution to your cryogenic needs
±10 micron vibration levels (anti-vibration options available for 0.5 micron)
Up to 300K available
Wide variety of sample space and wiring options (vacuum, inverted, top-loading, optical tail, low vibration etc.)
Downloads:
3K-INV-Sample-Plate
3K-INV-Wiring-Plates
a DRY Active Sorb for UHV Applicationsc
a DRY ICE 4K VL OPTI Optical Tail Cryostat_01b
a DRY ICE 4K VL OPTI Optical Tail Cryostat_02
a DRY ICE 4K VL OPTI Optical Tail Cryostat_03b
a DRY ICE 4K-B Basic Cryostat_01
DRY ICE 1.5K for Mossbauer Insert
DRY ICE 1.5K for Mossbauer
DRY ICE 4K-10K FLEXI 2b
干式1.5K变温插杆超导磁体系统
干式1.5K变温插杆超导磁体系统
The Dry ICE 1.5K VTI series is a fully customizable range of top loading, cryogen free systems designed to provide high cooling powers to the largest sample spaces on the market. Perfect for pre-screening samples within quantum applications.
The Dry ICE 1.5K offers excellenttemperature stability, fast cool down times, low vibration at the sample space, 4 axes of sample manipulation and magnet options to suit the experimenter’s field of research.
Downloads:
300mK Cold Probe
Carbon Fibre Probe
Insert Magnet
DRY ICE 1.5K 50mm_top
DRY ICE 1.5K 50mm
DRY ICE 1.5K 100mm
DRY ICE 1.5K 100mm_top
DRY ICE 1.5K 70mm_System
Superconducting Magnet
CF vs SS probes cool down
干式1.5K线站专用变温系统
干式1.5K线站专用变温系统
The DRYICE1.5K Beamline LEMON is a top loading beamline cryostat with continuous operation possible at <1.5K. Options are available with 30,50,70 and 100mm sample space. It is also designed to take a large experimental heat-load and provide the fastest available sample exchange time at <20 minutes to cool a sample down to <2.0K.
The tail set can be customised to minimise the amount of material in the beam-line and suit various beam-line configurations. The systems have been installed at many beam-line facilities around the world including; NIST, JPARC, SAFARI, Los Alamos, RAL (ISIS) and NRC (Canada).
FEATURES
Sample in Exchange gas but operation is possible in vacuum if required
Beam / Optical access and custom wiring available
Magnet options are available to suit your application requirement
Further Anti-vibration solutions are available.
Lower temperature capability
Sample Rotation options available
a DRY ICE 1.5K Beamline Cryostat_01b
a DRY ICE 1.5K Beamline Cryostat_02b
a DRY ICE 1.5K Beamline Cryostat_04b
DRYICE 1.5K 50 OPTI_1
IMGP0489
la tails
干式1.5K变温磁光系统
干式1.5K变温磁光系统
TheDRYICE1.5K OPTI MAGNETO Cryostat gives users optical access to their sample both parallel and perpendicular to the magnetic field at temperatures below 1.5K and up to 800K.
With a split pair magnet and 4 optical access points (including 2 re-entrant bores), the system can be used for Magneto Circular Dichroism, Raman Spectroscopy, Faraday Effect Measurement, Photoluminescence and Optical Characterisation of nano-devices.
The Variable Temperature Insert (VTI) forms an integral part of this cryostat with access for a top loading probe and may be wired with a sensor of your choice. The top loading probe option allows access to the sample space without the need to warm up the cryostat leading to fast sample change times.
Downloads:
a DRY ICE 1.5K-OPTI Magneto-Optical Cryostat render
DRY ICE 1.5K OPTI-MAGNETO for Mossbauer
DRY ICE 5K OPTI (Arkansas)
DRY ICE 5K OPTI_2
DRY ICE 5K OPTI_3
Split Pair Magnet_1bright
干式极低振动恒温器
干式极低振动恒温器
TheDRYICEDYADis a closed cycle system capable of cooling to 1.7K whilst providing excellent optical access and ultra-low vibration. The sample unit is held separately from the cold head and the main body of the cryostat on an optical table. The two are connected only by a soft thermal link to reduce vibration to a minimum.
The sample space environment can be switched between a top loading exchange gas module and a vacuum module within a couple of hours, making it a flexible solution for multiple applications in busy labs.
Customisation of the wiring and the addition of magnetic fields, nanopositioners and low temperature objectives are available.
Downloads:
DRY-ICE-DYAD-Exchange-Gasd_resized
DRY-ICE-DYAD-Vacuumd_resized
DRY-ICE-DYAD-Vacuum-Sample-Spaceb_resized
Vibration Graph
干式1K制冷机
干式1K制冷机
TheDry ICE 1K series is a range of cryostats with base temperatures between 0.8K and 1.2K
These systems are designed to take large experimental heat-loads across a large sample space making them perfect for high cooling power experiments and optical and photonic quantum computing applications.
Downloads:
a DRY ICE 1.0K Cryostat_02b
a DRY ICE 1.2K Cryostat_01b
a DRY ICE 1.2K Cryostat_02
a DRY ICE 1.2K Cryostat_03
a DRY ICE 1K Low Vibration Cryostat closer
a DRY ICE 1K Low Vibration Cryostat
DRY ICE 1.0K (IAS)
DRY ICE 1.0K (NPL)
DRY ICE 1K OPTI MAGNETO_1
DRY ICE 1K OPTI MAGNETO_3
干式氦三制冷机
干式氦三制冷机
TheDry ICE 300mK series is a range of closed cycle cryostats that work at He3 temperature both continuously and in single shot mode.
These systems are designed to deliver high cooling powers between 300mK and 400mK. The single shot systems offer extended hold times and rapid condense times to ensure as little as possible is spent away from experiments.
Downloads:
a DRY ICE 300mK He-3 Cryostat_02b
DRY ICE 300mK Cryostat
DRY ICE 300mK Cryostat_2
低温插杆
碳纤维快速降温样品杆
The carbon fibre sample rod allows fast cooling of samples in exchange gas. The top loading probe operates in the temperature range of 1.5K to 800K and is fitted with radiation baffles to minimise the conductive and radiated heat loads to the sample region.
The probe attaches viage a flange and hangs down inside the sample space of the insert. It is terminated in a copper mount which can be customised to secure our range of sample holders. The housing can be tailored to meet your needs.
CarbonFibreProbe_2
CarbonFibreProbeSampleHolder_1
CF vs SS cool down comparison(1)
干式氦三插杆
The ICECP 300mK Cold Proble is a compact and fast turnaround insert with 20, 32, 50, 56, 70 or 100mm outer diameter. It is available either for top loading into the variable temperature insert or for continuous flow systems (size permitting). The probe utilises the insert's capability of reaching 1.5K in order to condense the self-contained Helium 3 charge (Patented condensing method).
Downloads:
a ICE CP 300mK Cold Probe_01
a ICE CP 300mK Cold Probe_02
a ICE CP 300mK Cold Probe_03
a ICE CP 300mK Cold Probe_04
a ICE CP 300mK Cold Probe_05
a ICE CP 300mK Cold Probe_06
干式稀释制冷插杆
The ICECP25mK Cold Probe is a dilution insert aimed at achieving fast sample turnaround times at millikelvin temperatures.
THE ICE CP 25mK is compatible with both top loading systems into a VTI or continuous flow systems. When paired with an ICE cryostat, the probe can utilise dual-cool technology for an automated cooldown, requiring minimum input from the user during probe changes.
Downloads:
DRY ICE Cold Probe
DRY ICE Cold Probe_2
湿式1.5K变温插杆超导磁体系统
湿式1.5K变温插杆超导磁体系统
The WETICE1.5K MAGNETO integrated system is a liquid Helium based magnet and VTI combination designed to give excellent experimental access and ultra-low vibration for general research and SPM applications at <1.5K.
Liquid Helium evaporation is minimised by reducing the heat loads due to conduction and convection. This is achieved by use of the vacuum space isolation, the fitting of multi-layer super insulation shields and the employment of an FRP Helium can neckd
The liquid Helium bath is designed with a “belly” reservoir which sits above a narrower tail. This results in the amount of “non-usable” liquid helium, sometimes referred to as a “dead volume”, being significantly reduced, thereby avoiding unnecessary wastage. The tail can be made to suit the clear neck size of the cryostat or even smaller, such as to fit around an insert tail, experimental stage or a superconducting magnet.
It can easily be upgraded with He3 or dilution inserts for lower base temperatures.
Features:
Sample in Vacuum or Exchange gas available
Optical access and custom wiring available
Magnet options are available to suit your application requirement
Further Anti-vibration solutions are available.
a WET ICE 1.5K MAGNET 70mm_01b
a WET ICE 1.5K MAGNET 70mm_02b
a WET ICE 1.5K MAGNET 70mm_03b
a WET ICE 1.5K MAGNET 100mm_01b
a WET ICE 1.5K MAGNET 100mm_02b
a WET ICE 1.5K TL DIPPER_01
a WET ICE 1.5K TL DIPPER_02
a WET ICE 1.5K TL DIPPER_03
a WET ICE 1.5K TL DIPPER_04
湿式1.5K变温插杆磁光系统
湿式1.5K变温插杆磁光系统
TheWETICE1.5K OPTI system is a liquid Helium based system designed for excellent optical access and low vibration and integration with an electromagnet.
An excellent general research tool for spectroscopy applications at <1.5K.
Features:
Up to 5 windows available in a range of materials
Ultra low vibration options available using our support frames
a WET ICE 1.5K MAGNET OPTICAL Cryostat_01b
a WET ICE 1.5K MAGNET OPTICAL Cryostat_02b
a WET ICE 1.5K MAGNET OPTICAL Cryostat_03
WETICE1.5K OPTI MAGNETO
The WETICE1.5K OPTI MAGNETO magnet optical integrated system is a liquid Helium based magnet and VTI combination designed to give the excellent optical access. An excellent general research tool for magnetic properties and spectroscopy applications at <1.5K, it can easily be upgraded with He3 or dilution inserts for lower base temperatures.
Features:
Excellent optical access at 1.5K
Easily ugraded to achieve lower temperatures
Various magent options available
Downloads:
a WET ICE 1.5K MAGNET OPTICAL Cryostat_06
a WET ICE 1.5K MAGNET OPTICAL Cryostat_07
WET ICE 1.5K OPTI MAGNETO_1b
WET ICE 1.5K OPTI MAGNETO_2
WET ICE 1.5K OPTI MAGNETO_3square
湿式1.5K线站专用变温系统
湿式1.5K线站专用变温系统
The WETICE1.5K Beamline cryostat is a liquid Helium based VTI designed with a thinned Aluminium, Vanadium or Mylar tail-set to give the ultimate beamline access combined with a wide range of sample manipulation and fast sample change times.
This is an excellent general research tool for beam-line spectroscopy applications at <1.5K. It can easily be upgraded with He3 or dilution inserts to lower base temperature further.
Features:
Custom wiring and connectors
Custom tail-set to suit project requirements
Sample manipulation options
Insert upgrades available to further reduce temperature
a WET ICE 1.5K Beamline Cryostat_03b
WETICE 1.5K BEAMLINE
湿式氦三插杆
湿式氦三插杆
The WETICE300mK DIPPER manufactured predominantly using welded stainless-steel technology to provide a reliable and robust system.
It is designed to be used in any 4He cryostat with a neck diameter greater than 2 inches, including liquid 4He storage vessels.
Features:
Compatible with ICE cryogenic systems and helium transport dewars
Customisable sample space to suit customer requirements
Fast cooldown for a quick sample turnaround
a WET ICE 300mK He3 70mm DIPPER_05
a WET ICE 300mK He3 70mm DIPPER_06
湿式稀释制冷插杆
湿式稀释制冷插杆
TheDICEEASIFITis a high access dilution refrigerator available with 200µW and 400µW of cooling power.
TheDICEUHVis a top loading dilution refrigerator with a ultra high vacuum central tube, suitable for SPM experiments.
The uniquely designed insert and dilution unit incorporate a ‘D' shaped 1K pot, still and mixing chamber base for increased sample access. The large clear areas available for experimental access are ideally suited for installing an extensive range of electrical wiring options, fibre optics and other cryogenic devices.
The cryostat is designed to hold a sufficient volume of cryogens to allow for a convenient period of experimental operation between refills. It is constructed from non-magnetic materials with all vacuum seals tested for leak tightness on a mass spectrometer to better than 1 x 10-9mbarL/sec.
Features:
‘D’ shaped 1K pot for increased experimental access
Compatible with Cryomech re-liquefier
Low loss, less than 4 litres a day
Can be fitted with a top loading UHV central tube for SPM experiments
DICEEASIFIT and DICEUHV
DICEUHV
Sample in UHV Top Loading 3He Insert_1
Sample in UHV Top Loading 3He Insert_3
Sample in UHV Top Loading 3He Insert_4b
关于我们
上海趋量仪器有限公司为科研和工业客户提供专业的全方位解决方案。
联系我们
眭孟乔 博士 总经理
联系邮箱: info@qm-inst.com
办公地址: 上海市浦东新区杨思路860弄13号
Copyright @ 上海趋量仪器有限公司 All Rights Reserved 沪ICP备2023008124号
